SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 120)

C
ONFIGURING THE
S
WITCH
2-88
Command Attributes
• Default Priority – The priority that is assigned to untagged
frames received on the specified port. (Range: 0 - 7, Default: 0)
• Number of Egress Traffic Classes – The number of queue
buffers provided for each port.
Web – Click Priority, Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click Apply.
CLI – This example assigns a default priority or 5 to port 3.
Console(config)#interface ethernet 1/3 3-92
Console(config-if)#switchport priority default 5 3-161
b_mgmt.book Page 88 Tuesday, July 8, 2003 5:24 PM