SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 342)

C
OMMAND
L
INE
I
NTERFACE
3-174
Mirror Port Commands
This section describes how to configure port mirror sessions.
port monitor
Use this command to configure a mirror session. Use the no form
to clear a mirror session.
Syntax
port monitor interface [rx | tx | both]
no port monitor interface
• interface
- ethernet unit/port (source port)
- unit - Switch (unit 1).
- port - Port number.
• rx - Mirror received packets.
• tx - Mirror transmitted packets.
• both - Mirror both received and transmitted packets.
Default Setting
No mirror session is defined. When enabled, the default
mirroring is for both received and transmitted packets.
Command Mode
Interface Configuration (Ethernet, destination port)
Command Function Mode Page
port monitor Configures a mirror session IC 3-174
show port
monitor Shows the configuration for a mirror
port PE 3-175
b_mgmt.book Page 174 Tuesday, July 8, 2003 5:24 PM