beautypg.com

Ip igmp snooping vlan static, Ip igmp snooping vlan static -150 – SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart User Manual

Page 318

background image

C

OMMAND

L

INE

I

NTERFACE

3-150

ip igmp snooping vlan static

Use this command to add a port to a multicast group. Use the no
form to remove the port.

Syntax

ip igmp snooping vlan vlan-id static ip-address interface
no ip igmp snooping vlan vlan-id static ip-address interface

• vlan-id - VLAN ID (Range: 1-4094)

• ip-address - IP address for multicast group
• interface

• ethernet unit/port

- unit - This is device 1.
- port - Port number.

• port-channel channel-id (Range: 1-6)

Default Setting

None

Command Mode

Global Configuration

Example

The following shows how to statically configure a multicast group
on a port:

Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet
1/5
Console(config)#

b_mgmt.book Page 150 Tuesday, July 8, 2003 5:24 PM

See also other documents in the category SMC Networks Computer Accessories: