SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 232)

C
OMMAND
L
INE
I
NTERFACE
3-64
Example
SNMP Commands
Controls access to this switch from SNMP management stations, as
well as the error types sent to trap managers.
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with radius server:
Server port number: 49
Console#
Command Function Mode Page
snmp-server
community Sets up the community access string to
permit access to SNMP commands GC 3-65
snmp-server
contact Sets the system contact string GC 3-66
snmp-server
location Sets the system location string GC 3-66
snmp-server host Specifies the recipient of an SNMP
notification operation GC 3-67
snmp-server
enable traps Enables the device to send SNMP
notifications (i.e., SNMP traps) GC 3-69
snmp ip filter Sets IP addresses of clients allowed to
management access to the switch via
SNMP GC 3-70
show snmp Displays the status of SNMP
communications NE,
PE 3-71
b_mgmt.book Page 64 Tuesday, July 8, 2003 5:24 PM