SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 212)

C
OMMAND
L
INE
I
NTERFACE
3-44
logging host
Use this command to add a syslog server host IP address that will
receive logging messages. Use the no form to remove a syslog
server host.
Syntax
logging host host_ip_address
no logging host host_ip_address
host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• By using this command more than once you can build up a list
of host IP addresses.
• The maximum number of host IP addresses allowed is five.
Example
Console(config)#logging host 10.1.0.3
Console(config)#
b_mgmt.book Page 44 Tuesday, July 8, 2003 5:24 PM