SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 244)

C
OMMAND
L
INE
I
NTERFACE
3-76
• If the BOOTP or DHCP server has been moved to a different
domain, the network portion of the address provided to the
client will be based on this new domain.
Example
In the following example, the device is reassigned the same
address.
Related Commands
ip address (3-74)
ip default-gateway
Use this command to a establish a static route between this device
and management stations that exist on another network segment.
Use the no form to remove the static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart
Console#show ip interface
IP interface vlan
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: Dhcp.
Console#
b_mgmt.book Page 76 Tuesday, July 8, 2003 5:24 PM