Siemens CP 1515 User Manual
Page 63
&RQILJXULQJ ,QIUDVWUXFWXUH 1HWZRUNV
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
63
b.
Record the IP address on the
5/0 &RQILJXUDWLRQ 5HFRUG
located in
4. Enter the Read Write password and click
2.
(default password is
“public”).
•
If the RLM is found and if you entered the right passwords, a new
window appears with parameter tabs to change the configuration
(see
Figure 12 RLM Manager Wireless Interfaces tab
•
If the Radio Link Module is not found in the network and/or the
configuration is not read, or if the wrong password is entered, the
message “
,QYDOLG SDVVZRUG
” appears.
Click
2.
to return to the main RLM Manager window and try again.
You are now ready to change the RLM configuration settings.
6WHS 6HW 1HWZRUN 1DPH DQG 6DYH &RQILJXUDWLRQ
When installing the SIMATIC NET Industrial Wireless LAN network, you are
advised to modify the default settings of the wireless network interfaces.
Although the Radio Link Module will work fine with its factory-set values,
changing the parameters to unique values will differentiate your network
from possible neighboring networks.
1.
Select the tab
:LUHOHVV ,QWHUIDFHV
2. Choose the slot of the RLM (
3& &DUG VORW $
or
%
) that contains the PC
Card that you wish to configure.