Siemens CP 1515 User Manual

Page 194

$GYDQFHG 3DUDPHWHUV

194

Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager

C79000-G8976-C171-01

To enable Interference Robustness click the

$GYDQFHG

button on the

:LUHOHVV ,QWHUIDFHV

tab in the edit mode to display the Advanced Setup

window, then select the option

,QWHUIHUHQFH 5REXVWQHVV

'LVWDQFH %HWZHHQ $3V

In networking environments where you have either data intensive users, or a
large number of users in a small area, you may wish to consider increasing
the number of Access Point RLMs (making the distance between Radio Link
Modules smaller), and then adjusting the Distance Between APs parameter
to optimize the load balance of the number of wireless stations per Access
Point RLM.

To change the Distance Between APs parameter display the

:LUHOHVV

,QWHUIDFHV

tab in the edit mode and click the

$GYDQFHG

button. In the field

'LVWDQFH %HWZHHQ $3V

choose one of the three density options:

•

Large - (default)

•

Medium

•

Small

The default setting

/DUJH

provides a maximum wireless coverage with a

minimum number of Access Point RLMs. This option which is typically used
for single-cell networks, but will also provide an efficient and cost effective
solution for most networks that include multiple wireless cells.