Frequency channel – Siemens CP 1515 User Manual
Page 138
(OLPLQDWLQJ 5HGXQGDQW 7UDIILF
138
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
7.
Click
2.
to return to the Interface tab.
8. Click
2.
again to save the new configuration to the Access Point RLM
and to return to the main RLM Manager window.
9. Next create a backup-file of the new configuration (see
Back-up of the Configuration (page 66)
).
)UHTXHQF\ &KDQQHO 0DQDJHPHQW
When your network consists of more than one Access Point RLM, we
recommend that you alternate sub-channel frequencies between adjacent
Access Points RLMs to provide more bandwidth to the wireless stations in
each cell.
The number of available channels is subject to local radio regulations that
apply in your country. A list of supported channels for your country can be
found in the manual “Industrial Ethernet Wireless LAN Basics” and via the
MOBIC web site
KWWSZZZVLHPHQVFRPPRELF
.
'XDO &KDQQHO &RQILJXUDWLRQ
A Dual Channel system could look as follows:
•
All Access Point RLMs identified as operating on channel A would use
channel 1 (2412 MHz).
•
All Access Point RLMs identified as operating on channel B would use
channel 11 (2462 MHz).