Siemens CP 1515 - Manual (Page 205)

$GYDQFHG 3DUDPHWHUV
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
205
To enable spanning tree:
1. Click the
6SDQQLQJ 7UHH
button to open the Spanning Tree Setup
window (see Figure 38 Spanning Tree Setup window ).
2. Click the
(QDEOH 6SDQQLQJ 7UHH
check box;
3. Use default values (see Figure 38 Spanning Tree Setup window );
4. Click
2.
to return to the
%ULGJH
tab.
5. Click
2.
again if you want to save this configuration and return to the
main RLM Manager window. Otherwise continue changing other
parameters.
At this point, we recommend that you create a backup file, as described in
Step 4 - Create a Back-up of the Configuration (page 66) .
6WRUP 7KUHVKROG
The
6WRUP 7KUHVKROGV
button allows you to set parameters that are used
in protecting the network against message overload as received from a
single station or via a specific port.
The
6WRUP 7KUHVKROGV
window allows you to determine the maximum
number of multicast and broadcast messages that will be forwarded from
one port (or address) per second.