Siemens CP 1515 User Manual
Page 142
(OLPLQDWLQJ 5HGXQGDQW 7UDIILF
142
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
3. Choose the socket (A or B) for the network interface that you would like
to configure.
4. Click the
$GYDQFHG
button. The PC Card CP 1515 supports multiple
sub-channels, a pull-down box will appear, allowing you to select a
different operating frequency. The number of channels is subject to local
regulations.
5. In the Wireless Advanced Setup window, use the
&KDQQHO
pull-down
menu to select a sub-channel that allows for maximum channel
separation from neighboring Access Points RLMs (minimum channel
separation: 25 MHz).
lists a number of successful channel combinations that you can
use to configure SIMATIC NET IWL networks with multiple Radio Link
Modules.
•
For
Dual Channel Configuration (page 138)
, alternate between
channels A and B.
•
For
Multiple-Channel Configuration (page 140)
, alternate between
channels A, B and C
127(
i
The availability of the listed channels in
is subject to local radio regulations that
apply in your country. A complete list of supported channels for your
country can be found in the manual “Industrial Ethernet Wireless
LAN CP Basics” and via the MOBIC web site
KWWSZZZVLHPHQVFRPPRELF
.