Siemens CP 1515 - Manual (Page 214)

$GYDQFHG 3DUDPHWHUV
214 Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Password parameters you can create different levels of authority for your
LAN Administrators to configure and/or monitor the RLMs.
6\VWHP &RQWDFW
Use the field
6\VWHP &RQWDFW
to enter a generic name for the network
supervisor or department, (e.g. “Your LAN Administrator” as pictured in
Figure 41 Setup SNMP parameters ).
6\VWHP 1DPH
Use the field T’†‡r€ÃIh€r field to enter a generic logical location of the
Access Point RLM, (e.g. “Incoming Goods Department” as in Figure
41 Setup SNMP parameters ).
6\VWHP /RFDWLRQ
Use the field T’†‡r€ÃG‚ph‡v‚ to enter a generic physical location of the
Radio Link Module, (e.g. Access Point RLM floor 1N as in Figure 41 Setup
SNMP parameters ).
7UDS +RVW ,3 $GGUHVV
If you plan to use the trap alert system as described on Trap Host Alerts
(page 180) , you can use the 7UDS +RVW ,3 $GGUHVV field to enter the
address of the network management station that should collect the SNMP
trap messages. If you do not intend to use trap host alerts, the value is set
to “Don’t care”
.
For more detailed information about trap host messages, see Trap Host
Alerts (page 180) .