Siemens CP 1515 User Manual
Page 107
8VLQJ WKH 5/0 0DQDJHU
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
107
,PSRUWDQW ,QGLFDWRUV WR 0RQLWRU
The Signal to Noise Ratio (SNR) identifies the communication quality of the
radio path between the initiator station and its remote link test partner.
The color of the SNR indicator, the link quality indicator, and the remote
levels indicators relate to the following levels of communications quality:
If the level of SNR is lower than expected the signal and noise level
indicators may help you investigate the cause.
Click the
'HWDLOV
button to show the signal and noise level indicators.
•
A low signal level indicates that the “strength” of the radio signal is fairly
low, i.e. the Access Point RLM selected link test partner has moved
“out-of-range”
.
•
A high noise level indicates a source of radio interference in the radio
path between the RLM and its link test partners.
&RORU
'HVFULSWLRQ
• Green
Communication quality is “Good”
, no intervention is required.
• Yellow
Communication quality is “Marginal”
, no intervention is
required.
• Red
Communication quality is “Poor”
, intervention required. (see
)
• Blank
No connection