Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 77)

4.13 S
ENDING FAXES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
S
ENDING
F
AXES
Delayed transmission
Setting up a delayed transmission
Your machine can store up to 99 delayed commands, each of which you can program up
to 31 days in advance.
Your machine only remembers the day of the month that it is supposed to send a delayed
transmission. It does not remember the month itself. So if you want to send a transmis-
sion at 2:15 pm on 27 November, do not program the transmission sooner than 2:16 pm
on 26 October.
To set up a delayed transmission:
1
Switch to the Fax mode by pressing
COPY  FAX  SCAN
.
2
Load the document and make any necessary adjustments.
3
Press
ADVANCED FUNCTIONS
until “Delayed” appears on the LCD then press
ENTER
.
Delayed

/

/Enter
– or –
Press the soft key which assigned “Delayed”.
4
The machine shows the current day of the month, followed by the current time (in 24-
hour format):
Delayed
Enter Time: 27,14:15
5
Use the numeric keys to enter the day of the month and the time when you want the
fax to send the delayed transmission.
6
When the date and time are entered, press
ENTER
to save the delayed transmission.
Enter Fax Number
_
7
Enter the fax number.
You can either press a one-touch key, enter a speed-dial number or use the numeric
keys to enter the fax number.
8
Press
START
.
Your machine will scan the document into memory, then it returns to the standby
mode, while showing this on the LCD:
** Reserved **
Nov 27 2004 2:15pm
This means your machine is “Reserved” for the delayed transmission you just pro-
grammed.
• If you specified the delayed real time transmission (non-memory transmission), do not
remove the document in the ADF. If the document is removed from the ADF before a
delayed command completes, it cancels the delayed real time transmission.