Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 31)

1.13 L
AYOUT
& I
NSTALLATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
L
A
Y
OUT
& I
NST
ALLA
TION
Initial Setup
Clearing stored settings
Before using your machine, clear the built-in user data memory. This ensures the
memory will hold only your settings.
IMPORTANT: After you set the initial settings, do not clear the memory again without an autho-
rized technician’s advice.
To clear the memory:
1
Press
MENU
, , 0, 2.
Clear User Settings
Yes  Enter
Clear User Settings
No  Cancel
2
If you do want to clear the memory, press
ENTER
.
If you do not want to clear the memory, just press
CANCEL
.
Getting started
In some countries you are required by law to indicate your name and fax number on
every fax you send.
YOU MUST THEREFORE STORE YOUR NAME (OR COMPANY NAME) AND
FAX NUMBER IN YOUR MACHINE BEFORE USING IT.
Every fax page you send arrives at the receiving machine with a single line of text at
the very top of the page. This text lists a name, called the Transmit Terminal Identifier
(TTI), and a fax number.
In “Entering initial settings” below, you can stored the following items includes your
name and fax number registration.
• Language on the LCD and lists
• Current date and time
• Automatically daylight saving time
• Fax reception mode
• Dial tone detection
• Phone dialing type
• Your fax number
• TTI 1 / TTI 2 / TTI 3
• Usual TTI
• Idle time for switching to the Energy save mode
These settings you make here can always be changed later.