Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 116)

7.4 C
OPYING
Basic copy settings
Selecting document type
• Text — Select this when copying letters.
• Photo/Text — Select this when copying documents containing photographs or draw-
ings with letters.
• Photo — Select this when copying photographs or drawings.
To select the document type:
1
Press
DOC
.
RESOLUTION
.
Resolution :300dpi
 Text 
2
Press or to select the document type.
Scanning contrast
Setting the scanning contrast allows you to adjust the excessive lightness or darkness of
document pages you are copying.
To change the contrast setting:
1
Press
CONTRAST
.
Set Contrast
Light 
|
|  |
|  Dark
2
Press to be light, press to be dark, or press
CONTRAST
repeatedly to select the
contrast.
To avoid confusing the Light and Dark settings, just remember — “Light lightens” and
“Dark darkens” — to keep it straight.
Zoom ratio
There are three ways to enter the zoom ratio below.
NOTE: For enlargement copy, you can only use the document glass. The document glass is
available only for MFX-1330 model.
Using preset ratios
Press or to select the following preset ratio.
• 50%: Min.
• 64%: Letter (8.5"
× 11")  Half-letter (5.5" × 8.5")
• 78%: Legal (8.5" × 14")  Letter (8.5" × 11")
• 100%
• 129%: Half-letter (5.5"
× 8.5")  Letter (8.5" × 11")
• 200%: Max.