Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 55)

3.3 A
UTODIALER
& D
IALING OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
A
UT
ODIALER
& D
IALING
OPTIONS
Character Description Keystroke
– Makes long numbers easier to be read.
Press
ADVANCED FUNCTIONS
repeatedly until “Pause /Dial
Opt.” appears, then press
ENTER
. Repeat this procedure
until a “–” character appears
on the LCD.
– or –
Press a soft key to which
“Pause /Dial Opt.” is
assigned twice.
/T
Switches from pulse-dialing to tone-dialing.
No need to use this character on a tone line.
Press
ADVANCED FUNCTIONS
repeatedly until “Pause /Dial
Opt.” appears, then press
ENTER
. Repeat this procedure
until a “/T” character appears
on the LCD.
– or –
Press a soft key to which
“Pause /Dial Opt.” is
assigned until a “/T” is
appeared.
/N
Enters a “Dial prefix code” to access to alternative
telephone network.
“/N” must be entered to the first of number.
Press
ADVANCED FUNCTIONS
repeatedly until “Dial Prefix
(/N)” appears and press
ENTER
. Repeat this proce-
dure until an “/N” character
appears on the LCD.
– or –
Press a soft key to which
“Pause /Dial Opt.” is
assigned until an “/N” is
appeared.
NOTE: How to assign the “Pause /Dial Opt.” to a soft key, see page 8.2.
“Pause/Dial Opt.” is assigned to a soft key in F-300 model in the default setting.