Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 59)

3.7 A
UTODIALER
& D
IALING OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
A
UT
ODIALER
& D
IALING
OPTIONS
Speed-dial numbers
Entering or changing a speed-dial number
Your machine can store up to 160 speed-dial numbers, designated by three-digit identi-
fier codes from 001 through 160.
1
Press
MENU
, 1, 2, 1,
ENTER
. The empty speed-dial number will be shown.
Enter Speed Dial No.
001:No Number Stored
2
Press or to select a speed-dial number.
You can also select a speed-dial number by directly entering that three-digit identifier
code (001-160), using the numeric keys.
3
Press
ENTER
.
001:Fax Number
_
4
Use the numeric keys to enter the number exactly as your machine should dial it. The
number can be stored up to 40 characters:
To change a number, press or to move the cursor, press
CANCEL
to erase the
number. Then re-enter the correct number.
5
Press
ENTER
.
001:Name ;Upper
_
6
Use the numeric keys to enter the name for the speed-dial number.
The name can be stored up to 24 characters.
(Regarding how to enter the character, see “Entering character,” on page 2.2.)
To change a name, press or to move the cursor, press
CANCEL
to erase the name.
Then re-enter the name correctly.
7
Press
ENTER
to save the setting.
The next empty speed-dial number will be shown.
8
To enter another speed-dial number, repeat the procedure from step 2.
To exit the operation and return to standby mode, press
RESET
.
NOTE: To print a list of speed-dial numbers, press
MENU
, 5, 1, 0, 8,
ENTER
.
Erasing a speed-dial number
1
Press
MENU
, 1, 2, 2,
ENTER
.
2
Press or to select a speed-dial number.
You can also select a speed-dial number by directly entering that three-digit identifier
code.
3
Press
ENTER
twice.
If you want to quit without erasing, press
CANCEL
.
4
To erase another speed-dial number, repeat the procedure from step 2.
Otherwise, press
RESET
to return to the standby mode.