Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 174)

12.16 M
AINTENANCE
& P
ROBLEM SOLVING
Message on the LCD Description / Solution
Open&Close ScanCover
Reset Document
Either your document was not inserted correctly, or the fax to which you are sending
can not handle the document’s page length. Reset the page and try again.
Paper Mismatch
Set XXX paper
Press Stop
In PC printing, the size of paper in the paper cassette is not match up the paper size
you specified by printer driver. Press
STOP
to cancel a print job. Then set the correct size
of paper and try printing again.
Paper Mismatch
Roteta the paper
Press Stop
In PC printing, the direction of the Half-letter-sized paper on the bypass tray is wrong.
Half-letter is not available for PC printing. Set the Half-letter on the bypass tray.
Please Call Service
XXX
The printer unit of your machine does not work. Contact your Muratec dealer.
Please Supply Paper The paper cassette or bypass tray is out of paper. Supply paper to the cassette and/or
the bypass tray.
Please Wait Your machine’s printer is either warming up or busy. Please wait until the machine is
finished printing and then re-try your command or operation.
Polling In Use You tried to store the regular polling document in your machine, where one already had
been stored. Wait for the machine to complete the regular polling operation or delete the
stored document.
Printer In Use The command you are trying to enter requires the use of the printer, which is currently
in use. Wait for the machine to finish printing.
Protect Doc. Stored A received document was in your machine’s memory when you tried to turn off the
security reception passcode. Print the received document from your machine’s memory,
then retry the desired operation.
Pull Blue Rod and
Close Front Cover
The drum charge wire requires cleaning. Open the front cover, then pull the blue rod to
clean the charge wire.
Replace Drum Soon Your drum will need to be replaced soon. Please contact your Muratec dealer to pur-
chase a new drum cartridge.
Replace Drum Unit
Printer Not Usable
Your drum cartridge doesn’t work. Your machine cannot print until it is replaced with a
new drum cartridge.
Remove Bypass Paper
Open&CloseFrontCover
A paper is not properly fed into the machine through the bypass tray. Pull up the flap-
per release lever and pull the paper out of the machine. Then open and close the front
cover to reset the printer.
Scanner In Use The command you are trying to enter requires the use of the scanner, which is currently
in use. Wait for the machine to complete the scan, then re-try the desired command.
SecurityRx is Off You tried to turn the security reception on by pressing a soft key to which “security” is
assigned, but the security reception setting is not set to on.
To set the security reception setting to on, see page 9.3.
Select Paper Size You tried to make a copy in the following conditions:
• Paper size selection is set to “Auto”.
• The bypass tray has the paper other than Letter, Half-letter or Legal.
• Paper cassette runs out of paper.
Press
PAPER SIZE
/
NEXT DOC
. to select your desired paper.
Sub-address In Use You tried to enter a subaddress identical to one already used in another F-code box.
Enter a different subaddress.
Toner Almost Empty Your machine is almost out of toner.
Please contact your Muretec dealer soon to purchase a new toner cartridge.
Toner Empty
Printer Not Usable
Your toner cartridge is empty. Replace the toner cartridge. Your machine cannot print
until it is replaced with a new toner cartridge.
Too Many Characters You attempted to enter too many numbers or other characters in the current operation.
Press
CANCEL
to delete the extra characters, then try again.
Too Many Locations You tried to enter too many numbers for a broadcast. You can enter up to 200 autodialer
number and up to 30 numbers entered through the numeric keys.
Press
CANCEL
to delete the extra numbers.