Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 57)

3.5 A
UTODIALER
& D
IALING OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
A
UT
ODIALER
& D
IALING
OPTIONS
Quick access to one-touch registration
1
Make sure that the machine is in the fax standby mode.
Fax Ready
Nov 27 2004 2:15pm
2
Press an empty one-touch key you want to register. The machine will show:
01:Enter One-Touch
Yes  Enter
01:Enter One-Touch
No  Cancel
To cancel this operation, press
CANCEL
.
3
To store the one-touch number, press
ENTER
.
01:Fax Number
_
4
Use the numeric keys to enter the number exactly as your machine should dial it.
The number can be stored up to 40 digits.
To change a number, press or to move the cursor, press
CANCEL
to erase the
number. Then re-enter the correct number.
5
Press
ENTER
.
01:Name ;Upper
_
6
Use the numeric keys to enter the name for the one-touch key.
The name can be stored up to 24 characters.
(Regarding how to enter the character, see “Entering character” on page 2.2.)
To change a name, press or to move the cursor, press
CANCEL
to erase the name.
Then re-enter the name correctly.
7
Press
ENTER
to save the setting.
The machine will return to standby mode.
8
Use the one-touch key labels supplied with your machine to label the one-touch keys
with the stored names for easy reference.
Erasing a one-touch number
1
Press
MENU
, 1, 1, 2,
ENTER
.
2
Press or to select a one-touch number.
You can also select a one-touch key by pressing that key.
3
Press
ENTER
twice.
If you want to quit without erasing, press
CANCEL
.
4
To erase another one-touch number, repeat the procedure from step 2.
Otherwise, press
RESET
to return to the standby mode.