Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 120)

7.8 C
OPYING
Combine
This feature allows you to copy from two one-sided document to one sheet of Letter-sized
paper.
2
1
2 1
1
Make sure the machine is in the Copy mode.
2
Place your document on the ADF face up or on the document glass face down.
3
To make the combine copy available
For MFX-1330 model — Press
COMBINE
. The light of
COMBINE
will illuminate, which
means the combine key is turned on.
For F-300 model — Press
ADVANCED FUNCTIONS
repeatedly until “Combine” appears,
then press
ENTER
. And turn on “Combine” using the cursor key and press
ENTER
.
4
As needed, set the followings. (See “Basic copy settings” on page 7.4.)
• Document type and scanning contrast
• Number of copies
• Zoom ratio (25 to 400% for the document glass, 25 to 100% for the ADF.)
To reset the copy parameter to default setting, press
RESET
.
5
Press
START
.
To stop the copying, press
STOP
.
NOTE: The document glass is available only for MFX-1330 model.