Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 152)

10.8 M
ACHINE SETTINGS
Scanner settings
The scanner settings allows you to customize various scanner function to match your needs.
Accessing the scanner setting
1
Press
MENU
, 2, 4.
[Program] No.24_
4 Scanner Settings
2
Press
ENTER
.
[Program] No.241
1 Scan Parameters
3
Use or to search the item you want to set or change and press
ENTER
.
4
Change setting and press
ENTER
. For details of each settings, refer to the following
table:
5
When you have finished, press
RESET
to return to the standby mode.
The underlined settings are the factory defaults.
1 Scan Parameters Doc. Type You can choose one of the following.
Text, Photo&Text, Photo
Resolution You can choose one of the following.
200 dpi, 300 dpi, 600 dpi
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light, Lightest
3 Auto Reset Auto Reset Time
Set the time (minutes) for the scan parameters return to their initial
condition. You can change this time from 01 to 10 minutes.
03 min.
Reset After Scan
You can program the settings to return to their initial condition as soon
as the scanning is completed.
On, Off
For details of scanner settings, refer to the PDF manual on the Printer & Scanner driver CD.