Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 34)

1.16 L
AYOUT
& I
NSTALLATION
If you make a mistake, press
CANCEL
to erase to the left.
To change just one character, press or to move the cursor, press
CANCEL
to erase
it. Then re-enter the correct character.
21
Press
ENTER
.
TTI 2 ;Upper
_
If you do not want to enter TTI 2, skip to step 15.
22
Use the numeric keys to enter the name for TTI 2.
23
Press
ENTER
.
TTI 3 ;Upper
_
If you do not want to enter TTI 3, skip to step 17.
24
Use the numeric keys to enter the name for TTI 3.
25
Press
ENTER
to save the setting and continue.
Usual TTI selection
26
The machine now asks you to set the usual TTI usually shown at the top of faxes you
send.
Usual TTI :TTI 1

/

/Enter
27
Press or to select TTI 1, TTI 2 or TTI 3.
28
Press
ENTER
to save the setting and continue.
Idle time setting for switching to the Energy save mode
29
The machine now asks you to enter the time for the energy save mode.
Your machine will automatically enter the Energy save mode after your entered time
elapsed.
The default value is 15 minutes for MFX-1330 model, and 5 minutes for F-300 model.
Energy Save Timing
(001-240) 005 min.
30
Enter the time (in minutes) using the numeric keys.
31
Press
ENTER
to save the setting.
32
Press
RESET
to return to the standby mode.