Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 136)

9.6 S
ECURITY FEATURES
2
Use the numeric keys to enter the four-digit protection passcode and press
ENTER
.
001:PIN Number
_
3
Use the numeric keys to enter the PIN and press
ENTER
.
4
When you finish, press
RESET
.
NOTE: While in Mode 1, any autodialer numbers you use must include the PIN. This also
applies to autodialer numbers used with batch transmission (see page 4.14).
If you chose “Mode 2”
In Mode 2, you do not have to add the PIN to the autodialer setting. Instead, you enter
the PIN manually each time you autodial:
1
Dial the number as you normally would, using the autodialer.
The machine now asks for the PIN:
Enter PIN Number
_
2
Use the numeric keys to enter the PIN and press
START
.
Your machine dials the number.
Dialing from the numeric keypad while using the PIN mask
If you chose “Mode 1”
1
Enter the phone number, then press the key and enter the PIN.
The PIN always goes last.
For example, to dial 19725550911 with a PIN of “123456,” enter 19725550911*123456:
Press Start
13725550911*123456_
2
Press
START
. The PIN disappears from the display, and your machine dials the desired
phone number.
If you chose “Mode 2”
1
Enter the phone number as usual.
Press Start
13725550911_
2
Press
START
.
Enter PIN Number
_
3
Use the numeric keys enter the PIN and press
START
.
Your machine dials the number.