Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 137)

9.7 S
ECURITY FEATURES
1
2
3
4
5
6
7
8
9
12
13
14
A
S
ECURITY
FEA
TURES
Performing batch transmission while using the PIN mask
NOTE: The following instructions presume you are familiar with how to set and use both
your machine’s autodialer and its batch transmission feature. If you need to review,
see pages 3.1 to 3.12 for more on the autodialer and/or pages 4.14 to 4.16 for more
on batch transmission.
If you chose “Mode 1” or “Mode 2”
NOTE: Any autodialer number you use with batch transmission must include the PIN. (To
review how to include this information in an autodialer number, review the Mode 1
instructions under “Autodialing while using the PIN mask,” page 9.5.)
Before sending a batch transmission the first time, you must store the PIN within its
batch box.
1
Follow the steps for creating or modifying a batch box (page 4.14).
The machine asks for the fax number.
1:Fax Number
_
2
Enter an autodialer number or use the numeric keys to enter the fax number, to which
the batch transmission should go.
NOTE: If you are entering a number using the numeric keys, enter the fax number, followed
by the key and then the PIN.
3
Press
ENTER
to save the setting.
4
Continue with the steps for creating or modifying a batch box.
Now you can perform batch transmission to this box while the PIN mask is activated.