Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 139)

9.9 S
ECURITY FEATURES
1
2
3
4
5
6
7
8
9
12
13
14
A
S
ECURITY
FEA
TURES
4
Press
ENTER
.
01:Name ;Upper
_
5
Use the numeric keys to enter the name for the one-touch key.
The name can be stored up to 20 characters.
(Regarding how to enter the character, see “Entering character” on page 2.2.)
To change a name, press or to move the cursor, press
CANCEL
to erase the name.
Then re-enter the correct name.
6
Press
ENTER
to save the setting.
7
To enter another department code, repeat procedures from step 2.
To stop entering department codes, press
RESET
.
Erasing a department code
1
Press
MENU
, 3, 3, 3,
ENTER
.
Select Department No
001:987654321
NOTE: If department code operation is protected, the machine beeps briefly and then
returns to the standby mode. You will have to turn off the protection first.
2
Press or to select the code you want to erase.
3
Press
ENTER
. The following two displays will appear alternately:
001:Erase Dept. Code
Yes  Enter
001:Erase Dept. Code
No  Cancel
4
Press
ENTER
to erase the code.
To cancel the erasing, press
CANCEL
.
5
To erase another department code, repeat procedures from step 2.
To stop erasing department code, press
RESET
.
Turning the department code setting on and off
NOTE: To turn the department code setting on, at least one department code must be
existed in your machine.
1
Press
MENU
, 3, 3, 4,
ENTER
.
Fax Department :Off

/  /Enter
NOTE: If department code operation is protected, the machine beeps briefly and then
returns to the standby mode. You will have to turn off the protection first.
2
Press or to select on or off for fax department management.