Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 - Manual (Page 105)

6.5 U
SING
F-
CODE FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
U
SING
F-
CODE
BOX
FEA
TURES
Press or to select on or off, then press
ENTER
.
Go on to the next one.
• Erase Tx Doc — Determines whether to erase a document from the box after it is
sent to a polling request.
Erase Tx Doc. :Off

/  /Enter
On: Your machine erases the document from the box as soon as it sends it. If you
choose “On”, this box can be polled only once per document.
Off: Your machine does not erase a document from the box when it is polled. As
long as your machine holds AC power and you do not erase the document from
the box, the document is available indefinitely for polling.
Press or to select on or off, then press
ENTER
.
12
Go on to step 22.
If you setup a Relay box:
13
The machine asks the fax number where it relays the received documents.
Enter Relay Number
_
14
Press the one-touch key or press the
SPEED DIAL
/
TEL INDEX
followed by the three-digit
identifier to enter the fax number. You cannot use the numeric keys to enter these
numbers.
To add each fax number, press a soft key which assigned “
BROADCAST
” between each
one. You can specify up to 200 numbers. For detail of the soft key, see page 8.2.
15
Press
ENTER
.
Select TTI :Sender

/  /Enter
The machine asks the TTI you want to appear on the top line of faxes relayed to other
destinations.
• Sender — Relay the document with originator’s TTI.
• Both — Relay the document with both the originator’s TTI and your TTI.
• Yours — Relay the document with your TTI instead of the originator’s TTI.
16
Press or to select TTI. Then press
ENTER
.
Auto Print :Off

/

/Enter
On: A document will be printed automatically when it is received in the box.
Off: Received documents are not printed, only relayed to other destinations.
17
Press or to select on or off, then press
ENTER
.
18
Go on to step 22.