FUJITSU DL3750+/3850+ - Manual (Page 71)

PRINTING
PRINTING
User's Manual 4-1
Quick
Reference
Introduction
Setting Up
Paper
Handling
Printing
Setup Mode
CHAPTER
4
PRINTING
This chapter describes the following everyday
printing operations:
• Selecting print features
• Starting, stopping, or resuming printing
• Removing printed pages
• Clearing the print buffer
Instructions for loading paper are given in Chapter 3.
The print features you select determine how your printed pages will look.
Print features include the following:
• Print quality
• Fonts
• Pitch (characters per horizontal inch)
• Page length and width
• Line spacing (lines per vertical inch)
To select print features, you can use either commercial software or the printer
control panel. The method you use depends on the capabilities of your
software. If your software has most of the features you require, you may
rarely – if ever – have to use the control panel. In fact, your software often
overrides the printer settings.
If your software has limited options, you can use the printer control panel to
select print features. Sometimes, the control panel enables you to select
features not available through your software. For example, you can select
downloaded fonts not supported by your software.
SELECTING PRINT
FEATURES