FUJITSU DL3750+/3850+ - Manual (Page 66)

PAPER HANDLING
User's Manual 3-16
Line Feed/Form Feed
Use the line feed/form feed function to move paper forward. This function is
valid when the printer is online or offline. Pressing and holding down the LF/
FF button feeds one sheet of paper. Pressing the LF/FF button once advances
the paper one line (do not hold the button more than three seconds).
The printer does not allow you to execute “reverse” form or line feeds from
the control panel. To feed paper backward, manually rotate the platen knob.
Remember that the top-of-form will slip from the original setting.
Micro Feed
Use the micro feed function to fine tune the position of the paper. This
function is valid when the printer is offline. Press the ONLINE and LF/FF
buttons simultaneously to micro-feed paper forward. Press the ONLINE and
LOAD buttons simultaneously to micro-feed paper backward.
Remember that the top-of-form will slip from the original setting.
Load Position Adjust
Use also the micro feed function to adjust the load position of the paper. This
function is valid when the printer is offline. When this function is used
immediately after the LOAD button is pressed, the adjusted position is
retained temporarily as the new load position until the power is turned off.
Pressing the ONLINE and MENU buttons simultaneously saves the new load
position permanently. Load positions are saved separately for single sheets
and continuous forms.
FEEDING AND
POSITIONING PAPER