FUJITSU DL3750+/3850+ - Manual (Page 123)

Setup Mode
USING SETUP MODE
User's Manual 5-45
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items Options Description
SKIP-PR Setting of printing speed change
processing (skip)
ENABLE The skip processing is executed.
When a certain amount of blank
spaces are found in a line, it changes
the printing speed for the blank
spaces.
DISABLE The skip processing is not executed.
It does not change the printing speed
for the blank spaces.
- If the printing speed of the printing
data varies before and after the
blank spaces (such as LQ
characters + blank space + CQ
characters), it changes printing
speeds regardless of this setting.
STATUS Setting of the asynchronous status
function
ENABLE The status information is stored in the
send buffer by a nibble mode request.
DISABLE The status information is not stored in
the send buffer by a nibble mode
request.
BANDCTL Setting of reducing backward line
feeds as much as possible. Backward
line feeds occur when printing vertical
enlargement characters or multi-path
characters which involve several
printing paths for a print activation.
ENABLE Reduce control is performed.
DISABLE Reduce control is not performed.