Procedure, Procedure –27 – FUJITSU DL3750+/3850+ User Manual
Page 105
Setup Mode
USING SETUP MODE
User's Manual
5-27
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
3. Select an emulation.
Repeatedly press the LOAD button or the LF/FF button to position
the cursor under the emulation you require. Then do either of the
following:
•
Press the MENU button to select the emulation and print the next
MENU1 or MENU2 item. (As shown in Table 5.3, this is the
item).
•
Press the TEAR OFF button to select the emulation and print
<==END==>. Press the TEAR OFF button again to print the last
MENU1 or MENU2 item. (As shown in Table 5.3, this is the
the options you need to change are near the end of the list of
items.
Procedure
To change the options assigned to MENU1 or MENU2, make sure that
continuous forms paper is loaded and then proceed as follows:
1. Enter setup mode.
Place the printer offline. Press the TEAR OFF button and the
ONLINE button simultaneously until the printer beeps. Wait for the
printer to stop printing. The following <
printed:
<
SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT
2. Select the MENU1 or MENU2 function.
Repeatedly press the LOAD button or the LF/FF button to position
the red cursor under either the MENU1 or MENU2 function. Press
the TEAR OFF button or the MENU button to select the function and
print the following