FUJITSU DL3750+/3850+ - Manual (Page 133)

Setup Mode
USING SETUP MODE
User's Manual 5-55
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
Checking Vertical Print Alignment (V-ALMNT)
The V-ALMNT function corrects the vertical character displacement that
sometimes occurs with bidirectional printing. Characters printed from left to
right are not aligned with characters printed from right to left as shown
below:
This example shows how printing looks
when characters are vertically
misaligned. Note that the left
margin is not straight.
If you notice misaligned printing, use the following procedure to check and
correct the vertical print alignment.
Procedure
Make sure that continuous forms paper is loaded in the printer. If possible,
use forms at least 216 mm (8.5 inches) wide for 80 column printers or
356mm (14inches) wide for 136 colmun prnters to avoid printing on the
platen.
However, you can also use letter or A4 size forms if you set the WIDTH
option in MENU1 to 8 inches.
See the section Changing MENU1 and MENU2 Options for details. Then
proceed as follows to check and correct vertical print alignment:
1. Enter setup mode.
Press the MENU button and the TEAR OFF button simultaneously
until the printer beeps. Wait for the printer to stop printing and
check that the following <> menu is printed:
<>
SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT