FUJITSU DL3750+/3850+ - Manual (Page 45)

SETTING UP
User's Manual 2-25
Quick
Reference
Introduction
Setting Up
P
aper
Handling
Printing
Setup Mode
3. Select the MENU1 function.
Locate the red cursor on the plastic print guide. Initially, this cursor
should be positioned under SAVE & END at the beginning of the
<> menu. Press the LOAD button repeatedly to
position the red cursor beneath MENU1, as shown below:
Press the MENU button to select MENU1 and print the following
options:
<>
SAVE&END MENU1 MENU2 H ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT
DPL24C+ XL24E ESC/P2
The currently selected emulation is indicated by a short underline. In
the figure shown above, the Fujitsu DPL24C PLUS emulation is
selected.
4. Select an emulation.
Press the LOAD button repeatedly to position the red cursor under the
required emulation. Press the MENU button to select the emulation
and print the next MENU1 item.
Press the LOAD button to position
to the red cursor.