FUJITSU DL3750+/3850+ - Manual (Page 48)

SETTING UP
2-28 User's Manual
Using MS-DOS to Specify Serial Interface Settings
For an IBM PC or compatible device, use the following MS-DOS
MODE commands to set the computer serial settings to match the
printer factory settings:
MODE COM1:9600,N,8,1,P
MODE LPT1:=COM1
To activate these settings whenever you turn the computer on, write
the MODE commands in your AUTOEXEC.BAT file. Make sure
that the MODE.COM file is included in your root directory.
If the printer still doesn’t work, consult your dealer or someone
experienced in serial interface communications.
• If an error occurs during printing with Windows, simply printing
the page again will cause the printed characters to be garbled. To
avoid this problem, execute reset from the control panel or turn off
the printer, then print the page again.
You are now finished setting up and testing the printer. To familiarize
yourself with everyday printer operations, such as loading paper, selecting
print features, and printing, see Chapters 3 and 4.