FUJITSU DL3750+/3850+ - Manual (Page 108)

USING SETUP MODE
User's Manual 5-30
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
BI-DIR Bidirectional printing. The printer prints
in either direction while seeking the next
print direction for a shorter print time.
UNI-DIR Unidirectional printing. Unidirectional
printing is used for printing vertical lines
in tables even if vertical alignment is not
adjusted. Unidirectional printing is
slower than bidirectional printing.
Enables or disables the printer status
buzzer.
ON Buzzer on (recommended).
The printer beeps to indicate paper-
out or other conditions.
OFF Buzzer off under any conditions.
To determine the required word
length, refer to your computer
documentation. Select 8-BIT to print bit
image graphics.
8 BIT 8-bit word length (used by most
computers)
7 BIT 7-bit word length (MSB = 0)
Assigns buffer memory to input data and
downloaded font data.
Print buffer Download buffer
NONE 0 byte 128K bytes
256BYTE 256 bytes 127.75K bytes
2KBYTE 2K bytes 126K bytes
8KBYTE 8K bytes 120K bytes
24KBYTE 24K bytes 104K bytes
32KBYTE 32K bytes 96K bytes
96KBYTE 96K bytes 32K bytes
128KBYT 128K bytes 0K bytes
Options Description