FUJITSU DL3750+/3850+ - Manual (Page 102)

USING SETUP MODE
User's Manual 5-24
MENU1 and
MENU2 Items
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and Epson
ESC/P2 emulations. The notes are defined at the end of the table.
SET 1 IBM character set 1
SET 2 IBM character set 2
If a downloaded (soft) font is used, the
character set for that font overrides the
setting.
(*3)
ITALIC
Italic characters are available.
GRAPHIC Graphics characters (ruled lines) are
available.
For continuous forms, this option
specifies whether an inch is skipped
around the perforation. If you are not
using software to specify a bottom
margin, select SKIP when using thicker,
multipart forms.
SKIP One inch is skipped around the perfora-
tion.
NO-SKIP The perforation is not skipped. Printing
continues in the bottom margin of the
page.
13.6 IN 13.6-inch page width
(*5) 11.4 IN 11.4-inch page width
11.0 IN 11-inch page width
8.0 IN 8-inch page width
Specifies whether to print the number
(*2) zero with a slash. This is useful to
distinguish the capital letter “O”
from the number “0”.
Invalid for some soft fonts.
NO-SLSH 0
SLASH 0/
Options Description