Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator - Manual (Page 37)

4.1.7.2. KeyStep Pro as Slave
The KeyStep Pro can function as a slave to an external clock source. To use the KeyStep Pro
as a slave, Utility > MIDI Setting > Clock receive must be set to On. This is the default setting.
You can set the Slave sync options in Utility > Sync > Input. To access the utility menu, hold
down 'Shift' and press the Project button.
Sync Setting Description
Input Internal, USB, MIDI, 1 PP16, 2 PPQ, 24PPQ, 48PPQ, Auto Defines tempo source of KeyStep Pro
In this menu, you select how the KeyStep Pro will follow the tempo of external modules or
synths.
When the KeyStep Pro is in Slave mode:
• The Tempo controls will not control the internal sequencer while the external
clock source is running.
• The KeyStep Pro transport section will perform as usual: you can stop, start and
pause the internal sequences, and you can record patterns.
• When the external clock source is not running, the KeyStep Pro will function
according to its internal clock at the last set tempo.
• The KeyStep Pro will pass the synchronization messages it receives from the
external clock source to USB Out, MIDI Out 1, MIDI Out 2 and Clock Out.
Arturia - User Manual Keystep Pro - KeyStep Pro Overview 31