Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator - Manual (Page 109)

5.4.3.8. Saving a Drum Pattern
Saving a Drum Pattern is the same procedure as saving sequencer patterns on Tracks 2-4:
To save one Drum Pattern:
• Hold down Save and press Pattern. Saved steps will blink in blue; steps with
unsaved edits will blink in red
• Press the red-lit step button of the Drum Pattern you want to save.
If there is more than one Drum Pattern with unsaved changes:
• Hold down Save and press Pattern. Saved steps will blink in blue; steps with
unsaved edits will blink in red
• Keep the Save button held down and press the red-lit step buttons of all the Drum
Patterns you want to save
• Press Exit to exit the Save process.
A shortcut for saving all unsaved Drum Patterns is to press Save + Track 1.

!: As you may have guessed, a quick way to check whether the Patterns you're working on contain
unsaved changes is to hold down the Save button. Patterns that contain unsaved changes will light up
in red.
5.4.3.9. Copying a Drum Pattern
When working in the Drum sequencer, you can copy a Drum Pattern from one location to
another, even if you have made no edits. To do this, simply follow the procedure described
in Copy, Paste & Erase of Drum Patterns [p.123]
5.4.3.10. Clearing a Drum Pattern
To clear the events (triggers) stored in the current Drum track, hold down 'Shift' and press
Clr Steps. To clear the entire Pattern and reset all of its settings (track lengths, Time Division,
etc.) to their defaults, hold down 'Shift' and press Clr Ptn.
Arturia - User Manual Keystep Pro - Making Tracks 103