Looper touch strip, Midi send/receive, Midi cc – Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator User Manual
Page 158

9.1.8. Looper Touch Strip
Parameter
Values
MIDI Send/Receive
[OFF (d), Send, Receive, Both]
MIDI CC
[1-127], 9 (d)
This menu item enables you to set the values the Looper will receive and transmit when
touched.
The looper is a great tool in live situations. By holding one of its repeat points, you can loop
part of a pattern. To record this activity in your DAW, MIDI send must be enabled. You can
enable it in UTIL>Touch Strip>MIDI Send/Receive or in this menu. By default, it is set to 'OFF'.
Once enabled, you can draw repeat patterns in your DAW using CC# 9. Please refer to the
documentation of your DAW for details. Refer to
for detailed info on how to
record looper activity in your DAW and how to control the looper from your DAW.
♪
: If you need to change the default CC# to which the looper responds, do it in UTIL>Touch Strip>MIDI
CC# or in this menu.
9.1.8.1. MIDI Send/Receive
Use this menu to specify whether the KeyStep Pro's Looper Touch Strip will send MIDI
and react to incoming MIDI messages. The range of transmitted and recognized values is
detailed below in
Using the Looper Touch Strip with a DAW [p.153]
9.1.8.2. MIDI CC
Use the value field to select the MIDI CC number that the Looper Touch Strip will use to
transmit and receive.
152
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration