Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator - Manual (Page 107)

Set Pattern Length
The default length of a Pattern is 16 steps, but you can extend this length up to a maximum
of 64 steps, as described above.
If you'd like your Pattern to be shorter than 16 steps, simply hold down the Lst Step button
then press the step button of the desired last step. If you'd like your Pattern to be longer than
16 steps but not cover the whole page length, first select the desired page by pressing the
32, 48 or 64 button, then press the step button of the step within that page that you want to
be the last step of the Pattern.
For example, if you want to create a Pattern with a length of 34 steps: - Hold down Lst Step
and then press the 48 button - Keep holding down Lst Step and press the step 2 button.
Editing Extended Step Ranges
If you want to focus on steps 17-32 (page 2) while editing, here's what to do:
• Disable Pattern Follow mode by holding down 'Shift' and pressing Lst Step/Follow
• Press the 32 (page 2) button.
Now the step buttons will only show the status of steps 17-32. If you want, you can play
the Pattern while editing; it will play all 32 steps, but the step buttons will keep showing the
status of steps 17-32.
Simply edit the steps as desired using the step buttons and the main encoders: Gate,
Velocity, Time Shift and Randomness. When you're finished, if you like, you can re-enter
Pattern Follow mode with 'Shift' + Lst Step/Follow.
Arturia - User Manual Keystep Pro - Making Tracks 101