Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator - Manual (Page 156)

9.1.6. CV Settings
CV
settings
Values Description
Voice
1.....4
Pitch
Format [1V/Oct (d)
1.2V/Oct Hz/V]
Defines the voltage level the KeyStep Pro will output at the CV Pitch
Out. 1V/Oct (Eurorack and others), Hz/V or 1.2V/Oct (Buchla)
Base
Note
[C-2 (d) to G8] Sets at which MIDI note the Pitch out outputs 0V
Gate
Format
[V Trig 5V (d),
V Trig 10V, S-
Trig]
Defines the gate voltage level the KeyStep Pro will output at Gate
Out
Mod
Type [Velo (d),
Pressure]
Determines which parameter will be sent to the Velo / Mod outputs
Mod
Max
Voltage
1-10 Volt Sets a maximum limit to the voltage output of the Mod type
Pitch
bend
range
(1-24)
semitones
Set a maximum pitch-bend range in semitones. Default = 2
This is where you select the electrical behaviour for each sequencer.
Drum
Gates
Values Description
Gate 1...8
format
[V-Trig 5V (d), V-Trig
12V, S-Trig] Sets the trigger standard of the Drum Gates, V-Trig 5V
being the default.
This is where you set the output voltage level of the Drum Gates. Different brands of synths
and drum synths may require different voltages to trigger them properly.
150 Arturia - User Manual Keystep Pro - KeyStep Pro Configuration