Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 50)

Chapter 3: Operation
42 TruVision Navigator 5.0 Service Pack 3 User Manual
In addition, the Status column provides the results of the Ping, Assign IP Address, Get
Firmware Version and Reboot commands.
Assign IP Address
Allows the users to assign IP address to a camera.
1. Select a camera from the device discovery list
2. Click [Change IP Address] button located at the top menu of discovery tool.
3. Enter the [New IP Address] to the related field, and click [Ok]
Ping
Allows the users to ping device(s) to check the link activity. Status of the ping command
is given in the “Status” field.
Reboot
Allows the user to remotely reboot device(s) with one click. Status of the reboot
command is given in the “Status” field.
Opening Webpage of a Device
Allows the user to open the web browser menu of a device.
Checking default credentials of a device
Allows the user to check if device credentials are changed from the default values.
Adding Cameras via Discovery Tool
TruVision Navigator is equipped with an embedded device discovery tool that discovers
the devices in the network, and lets the user to add one or more of those devices to the
Navigator.