Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 137)

Appendix A: Device Details
TruVision Navigator 5.0 Service Pack 3 User Manual 129
Feature Support Notes
Notifications Alarm
Motion
Video Loss
Disk Full
Hard Disk Error
To setup the device to send TCP notifications for
cameras, right-click on the device in the Navigator
and select Configure Device. On the Camera
Tab’s Event Section, select the events you would
like to receive per camera. On the Alarms Tab,
Remote Alert section, the Notify IP Address should
be the IP address of where the TruVision
Navigator Server services are located (Notification
Writer and Notification Processor). The Notify Port
is defaulted to 5000 and is editable. Ensure this
port matches the one listed on the TruVision
Navigator Server Properties dialog, Notifications
Tab.
Restart both the Notification Writer and Notification
Processor for TruVision Navigator to process the
notifications.
Health
Diagnostics Host Name
IP Address
MAC Address
Equipment Name
Model Name
Hardware Revision
Firmware Version
Device Time/Date
Current Client Connections
Record Status
First Recorded Video
Latest Recorded Video
Video Stored (Days)
Video Stored (Hours)
Physical Disk Model Name
Physical Disk Count
HDD Status
HDD Capacity (Gb)
HDD Temperature (C)
HDD Temperature (F)