Interlogix TruVision Navigator 5.0 User Manual User Manual
Page 130
Appendix A: Device Settings
122
TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support
Notes
Focus, Iris
Control
Yes
Presets Yes
Tours Go
To
Record
Only 1 tour is supported (which is hard coded to
Tour 1 on the PTZ camera).
Camera Search
Alarm
Event
Motion
Text
POS Text
Yes
Motion Yes
Get the configuration for this device via TruVision
Navigator and set the active zones on a per camera
basis via the Motion Configuration option
associated with each camera.
Audio
Yes
There are 4 audio input per device. That input can
be mapped to any camera on the device simply by
enabling audio on that camera. Access the setting
by going to the device configuration, and enabling
the audio option on the Recording Tab for each
camera. If enabled, as soon as any camera from
the device is added in the TruVision Navigator
Viewer and selected, the audio will play.
Bi-directional
Audio
Yes