Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 181)

Appendix A: Device Details
TruVision Navigator 5.0 Service Pack 3 User Manual 173
different platforms. TruVision Navigator now supports analog DVRs, hybrid DVRs (both
analog and IP), NVRs, and TruVision SVR for COTS servers. The table below outlines
the 3 OOBEs and the differences between them.
DVR HYBRID DVR NVR
Analog cameras only Analog and IP cameras IP cameras only
DSR
DVSE
StoreSafe
DVMRe
SymDec
SymSafe
DVSRXu
TruVision TVR10
TruVision TVR11
TruVision TVR12
TruVision TVR30
TruVision TVR40
TruVision TVR42
TruVision TVR60 TruVision TVN10
TruVision TVN21
TruVision TVN50
TruVision TVN40
TruVision TVN20
TruVision SVR
STEP 1 – INSTALL DEVICE
Install device on network
Apply IP address
Make other device-level
configurations from on-screen-
display (OSD)(optional)
Install device on network
Apply IP address
Make other device-level
configurations from on-screen-
display (OSD)(optional)
Install device on network, or,
Install SVR software to a
COTS server, and place on
network
Apply IP address
STEP 2 – INSTALL CAMERAS
Install analog cameras
Physically connect cameras to
device
Make camera configurations
from device OSD (optional)
Analog Cameras
Install analog cameras
Physically connect cameras to
device
Make analog camera
configurations from device OSD
(optional)