Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 112)

Appendix A: Device Settings
104 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
Disk Analysis Alarm
Motion
Video Loss
Recorded
Unknown (video data may or may
not be tagged with a type, and
therefore is marked as unknown)
Video Export Yes
TruVision Navigator
Player Yes .wvf proprietary file format.
PTZ Control Yes
Focus, Iris Control Yes
Presets Yes
Tours No Go To and Record is not supported.
Camera Search Alarm
Event
Motion
Text
However, Text Search is not available on the
DVMRe CS, DVMRe CD, DSR, or DVSE
models.
Motion Yes get the configuration for these devices via
TruVision Navigator and set the active zones on
a per camera basis via the Motion Detection
Tabs associated with each camera.
Audio Yes An audio module is required in these units.
There is 1 audio input per device. That input
can be mapped to any camera on the device
simply by where the microphone is located.
Enabling audio on the device is a global setting.
Access the setting by going to the device
configuration, and enabling the "G711" audio
option on the Audio Setup Tab. If enabled, as
soon as any camera from the device is added in
the TruVision Navigator Viewer, the audio will
play.