Innotech Genesis II Digital Controller (v5) - Manual (Page 73)

Page 73
Genesis II Installation Instructions
© Mass Electronics Pty Ltd 2010 Chapter 3 – Electrical Installation
3-4.19 SENRx Series Wireless Temperature Sensors
The Innotech SENRx Series Wireless Temperature Sensors are remote expansion devices for the
Genesis II range of digital controllers. There are four unique models in the SENRx series:
• SENR1: Temperature Sensor, Low Battery Indicator.
• SENR2: Temperature Sensor, Low Battery Indicator, Set Point Adjustment.
• SENR5: Temperature Sensor, Low Battery Indicator, After Hours Button.
• SENR5: Temperature Sensor, Low Battery Indicator, Set Point Adjustment, After Hours Button.
The SENRx Series Wireless Temperature Sensors (Figure 3-23) are powered by 3.6VDC ½AA Lithium
Battery. Battery life is 12 months minimum.
There are no inputs or outputs on a SENRx Series Wireless Temperature Sensor. They are designed to
send the output data to a GENII WMI Wireless Module Interface located up to 20 m away (depending
on obstructions).
Figure 3-23: SENRx Wireless Temperature Sensor (Back View)