Innotech Genesis II Digital Controller (v5) - Manual (Page 107)

Page 107
Genesis II Installation Instructions
© Mass Electronics Pty Ltd 2010 Chapter 5 – Network Installation
Zone A Zone B
Repeater
See Note See Note
1
2
Zone B Zone A
Repeater
See Note See Note
1
2
5-3.3.3 Innotech Repeater IR11 on a REM Network
The Innotech Repeater IR11 is a single channel repeater designed to expand a Sub System Network or
REM network. It runs off either a 24VAC or DC power supply. A typical example of how the IR11 can be
incorporated into an Sub System Network or REM network is given in Figure 5-3.
5-3.3.4 Innotech Repeater IR12 on a Primary Network
The Innotech Repeater IR12 is a dual channel repeater designed to expand both NET and GLOBAL
comms networks. It runs off either a 24VAC or DC power supply. A typical example of how the IR12
can be incorporated into a Primary Network is given in Figure 5-4 .
Maximum Cable length is 400 metres at 57,600 Baud Rate (Default) and 1,000 metres at 9,600 Baud Rate.
NOTE
Figure 5-3: Linking Networks in Different Locations