1 introduction, 1.1 systems covered by this manual – Innotech Genesis II Digital Controller (v5) User Manual
Page 12

Genesis II Installation Instructions
Page 12
© Mass Electronics Pty Ltd 2010
Edition 2.0 dated 06/12/2013
1-1 Introduction
This manual is intended to provide qualified technical personnel with complete and easy-to-follow
instructions for the installation, checkout and commissioning of the Innotech Genesis II Direct Digital
Controller and MPCII Mid Points Controller.
Although the intent of this manual is to simplify the installation task, instructions contained in this
manual are based on the assumption that installation of a Genesis II System will be accomplished by
technically qualified personnel. Also, these instructions presuppose that installation personnel are
familiar with local regulations, codes and safety requirements.
Installers should familiarise themselves with the content of this manual before attempting
installation of the Genesis II Direct Digital Controller or MPCII Mid Points Controller.
Throughout this manual there are icons to illustrate notes and points of caution, as illustrated below:
1-1.1 Systems Covered by this Manual
Systems are intended for use in a variety of applications, the systems are designed on a modular
basis. Modularity provides the most economical and efficient means of adapting the system to
the customer’s specific requirements. Also, in seeking to improve customer satisfaction through
product improvement, Innotech often provides updates and revisions to its Genesis product line. The
modularity concept and equipment revisions result in a large array of different types of hardware
available to the customer.
The manual covers the Genesis II System. This system is based on one or more controllers as the
major control units interconnected with several ancillary units. These major control units included in
this manual are:
• Genesis II Direct Digital Controller
• MPCII Mid Points Controller
For purposes of explanation, a System is defined as one or more controller units interconnected with
various ancillary units for the purpose of performing specific functions. A Genesis II System consists
of one or more Genesis II Direct Digital Controllers and/or MPCII Mid Points Controllers as the major
control unit(s).
Notes contain useful information, which should be read.
NOTE
Important Notes contain information, which is important for ensuring success.
IMPORTANT
Caution Notes contain critical information, which
MUST be read.
CAUTION