General commands, Report luns command, Table 2 – Quantum TC2201 User Manual
Page 86: Format of report luns command
Appendix B Inband SCSI-3 Commands
General Commands
Quantum TC201 User’s Guide
66
General Commands
2
Following is a description of a general-use SCSI-3 command. For more
information about the other general-use commands, please contact your
service representative.
Report LUNs Command
2
The TC2201 supports the Report LUNs command. The Report LUNs
command will return a list of Logical Unit Numbers (LUNs) that can
receive commands. The format of the report LUNs
command is shown in Table B-1.
Table 2 Format of Report LUNs
Command
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code ( 0xA0)
1
Reserved
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
(MSB)
7
Allocation Length
8
9
(LSB)
10
Reserved
11
Control Byte
The TC2201 returns the LUN Parameters as defined in B-2.